Arthropod diversity in the alpine tundra using metabarcoding: Spatial and temporal differences in alpha- and beta-diversity.

All ecosystems face ecological challenges in this century. Therefore, it is becoming increasingly important to understand the ecology and degree of local adaptation of functionally important Arctic-alpine biomes by looking at the most diverse taxon of metazoans: the Arthropoda. This is the first study to utilize metabarcoding in the Alpine tundra, providing insights into the effects of micro-environmental parameters on alpha- and beta-diversity of arthropods in such unique environments. To characterize arthropod diversity, pitfall traps were set at three middle-alpine sampling sites in the Scandinavian mountain range in Norway during the snow-free season in 2015. A metabarcoding approach was then used to determine the small-scale biodiversity patterns of arthropods in the Alpine tundra. All DNA was extracted directly from the preservative EtOH from 27 pitfall traps. In order to identify the controlling environmental conditions, all sampling locations were equipped with automatic data loggers for permanent measurement of the microenvironmental conditions. The variables measured were: air temperature [°C] at 15 cm height, soil temperature [°C] at 15 cm depth, and soil moisture [vol.%] at 15 cm depth. A total of 233 Arthropoda OTUs were identified. The number of unique OTUs found per sampling location (ridge, south-facing slope, and depression) was generally higher than the OTUs shared between the sampling locations, demonstrating that niche features greatly impact arthropod community structure. Our findings emphasize the fine-scale heterogeneity of arctic-alpine ecosystems and provide evidence for trait-based and niche-driven adaptation. The spatial and temporal differences in arthropod diversity were best explained by soil moisture and soil temperature at the respective locations. Furthermore, our results show that arthropod diversity is underestimated in alpine-tundra ecosystems using classical approaches and highlight the importance of integrating long-term functional environmental data and modern taxonomic techniques into biodiversity research to expand our ecological understanding of fine- and meso-scale biogeographical patterns.

Patterns, timing, and environmental drivers of growth in two coexisting green-stemmed Mediterranean alpine shrubs species.

The Mediterranean alpine is one of the most vulnerable ecosystems under future environmental change. Yet, patterns, timing and environmental controls of plant growth are poorly investigated. We aimed at an improved understanding of growth processes, as well as stem swelling and shrinking patterns, by examining two common coexisting green-stemmed shrub species. Using dendrometers to measure daily stem diameter changes, we separated these changes into water-related shrinking and swelling and irreversible growth. Implementing correlation analysis, linear mixed effects models, and partial least squares regression on time series of stem diameter changes, with corresponding soil temperature and moisture data as environmental predictors, we found species-specific growth patterns related to different drought-adaptive strategies. We show that the winter-cold-adapted species Cytisus galianoi uses a drought tolerance strategy combined with a high ecological plasticity, and is, thus, able to gain competitive advantages under future climate warming. In contrast, Genista versicolor is restricted to a narrower ecological niche using a winter-cold escape and drought avoidance strategy, which might be of disadvantage in a changing climate. Pregrowth environmental conditions were more relevant than conditions during growth, controlling the species' resource availability. Thus, studies focusing on current driver constellations of growth may fail to predict a species' ecological niche and its potential future performance.

Human Body-Fluid-Assisted Fracture of Zinc Alloys as Biodegradable Temporary Implants: Challenges, Research Needs and Way Forward.

Alloys of magnesium, zinc or iron that do not contain toxic elements are attractive as construction material for biodegradable implants, i.e., the type of implants that harmlessly dissolve away within the human body after they have completed their intended task. The synergistic influence of mechanical stress and corrosive human body fluid can cause sudden and catastrophic fracture of bioimplants due to phenomena such as stress corrosion cracking (SCC) and corrosion fatigue (CF). To date, SCC and CF of implants based on Zn have scarcely been investigated. This article is an overview of the challenges, research needs and way forward in understanding human body-fluid-assisted fractures (i.e., SCC and CF) of Zn alloys in human body fluid.

The combined effect of zinc and calcium on the biodegradation of ultrahigh-purity magnesium implants.

Magnesium (Mg)-based implants are promising candidates for orthopedic interventions, because of their biocompatibility, good mechanical features, and ability to degrade completely in the body, eliminating the need for an additional removal surgery. In the present study, we synthesized and investigated two Mg-based materials, ultrahigh-purity ZX00 (Mg-Zn-Ca; <0.5 wt% Zn and <0.5 wt% Ca, in wt%; Fe-content <1 ppm) and ultrahigh-purity Mg (XHP-Mg, >99.999 wt% Mg; Fe-content <1 ppm), in vitro and in vivo in juvenile healthy rats to clarify the effect of the alloying elements Zn and Ca on mechanical properties, microstructure, cytocompatibility and degradation rate. Potential differences in bone formation and bone in-growth were also assessed and compared with state-of-the-art non-degradable titanium (Ti)-implanted, sham-operated, and control (non-intervention) groups, using micro-computed tomography, histology and scanning electron microscopy. At 6 and 24 weeks after implantation, serum alkaline phosphatase (ALP), calcium (Ca), and Mg level were measured and bone marrow stromal cells (BMSCs) were isolated for real-time PCR analysis. Results show that ZX00 implants have smaller grain size and superior mechanical properties than XHP-Mg, and that both reveal good biocompatibility in cytocompatibilty tests. ZX00 homogenously degraded with an increased gas accumulation 12 and 24 weeks after implantation, whereas XHP-Mg exhibited higher gas accumulation already at 2 weeks. Serum ALP, Ca, and Mg levels were comparable among all groups and both Mg-based implants led to similar relative expression levels of Alp, Runx2, and Bmp-2 genes at weeks 6 and 24. Histologically, Mg-based implants are superior for new bone tissue formation and bone in-growth compared to Ti implants. Furthermore, by tracking the sequence of multicolor fluorochrome labels, we observed higher mineral apposition rate at week 2 in both Mg-based implants compared to the control groups. Our findings suggest that (i) ZX00 and XHP-Mg support bone formation and remodeling, (ii) both Mg-based implants are superior to Ti implants in terms of new bone tissue formation and osseointegration, and (iii) ZX00 is more favorable due to its lower degradation rate and moderate gas accumulation.

Alpine shrub growth follows bimodal seasonal patterns across biomes - unexpected environmental controls.

Under climate change, cold-adapted alpine ecosystems are turning into hotspots of warming. However, the complexity of driving forces of growth, associated biomass gain and carbon storage of alpine shrubs is poorly understood. We monitored alpine growth mechanisms of six common shrub species across contrasting biomes, Mediterranean and tundra, using 257 dendrometers, recording stem diameter variability at high temporal resolution. Linking shrub growth to on-site environmental conditions, we modelled intra-annual growth patterns based on distributed lag non-linear models implemented with generalized additive models. We found pronounced bimodal growth patterns across biomes, and counterintuitively, within the cold-adapted biome, moisture, and within the drought-adapted biome, temperature was crucial, with unexpected consequences. In a warmer world, the Mediterranean alpine might experience strong vegetation shifts, biomass gain and greening, while the alpine tundra might see less changes in vegetation patterns, minor modifications of biomass stocks and rather browning.

Implant degradation of low-alloyed Mg-Zn-Ca in osteoporotic, old and juvenile rats.

Implant removal is unnecessary for biodegradable magnesium (Mg)-based implants and, therefore, the related risk for implant-induced fractures is limited. Aging, on the other hand, is associated with low bone-turnover and decreased bone mass and density, and thus increased fracture risk. Osteoporosis is accompanied by Mg deficiency, therefore, we hypothesized that Mg-based implants may support bone formation by Mg2+ ion release in an ovariectomy-induced osteoporotic rat model. Hence, we investigated osseointegration and implant degradation of a low-alloyed, degrading Mg-Zn-Ca implant (ZX00) in ovariectomy-induced osteoporotic (Osteo), old healthy (OH), and juvenile healthy (JH) groups of female Sprague Dawley rats via in vivo micro-computed tomography (µCT). For the Osteo rats, we demonstrate diminished trabecular bone already after 8 weeks upon ovariectomy and significantly enhanced implant volume loss, with correspondingly pronounced gas formation, compared to the OH and JH groups. Sclerotic rim development was observed in about half of the osteoporotic rats, suggesting a prevention from foreign-body and osteonecrosis development. Synchrotron radiation-based µCT confirmed lower bone volume fractions in the Osteo group compared to the OH and JH groups. Qualitative histological analysis additionally visualized the enhanced implant degradation in the Osteo group. To date, ZX00 provides an interesting implant material for young and older healthy patients, but it may not be of advantage in pharmacologically untreated osteoporotic conditions. STATEMENT OF SIGNIFICANCE: Magnesium-based implants are promising candidates for treatment of osteoporotic fractures because of their biodegradable, biomechanical, anti-bacterial and bone regenerative properties. Here we investigate magnesium‒zinc‒calcium implant materials in a rat model with ovariectomy-induced osteoporosis (Osteo group) and compare the related osseointegration and implant degradation with the results obtained for old healthy (OH) and juvenile healthy (JH) rats. The work applied an appropriate disease model for osteoporosis and focused in particular on long-term implant degradation for different bone conditions. Enhanced implant degradation and sclerotic rim formation was observed in osteoporotic rats, which illustrates that the setting of different bone models generates significantly modified clinical outcome. It further illustrated that these differences must be taken into account in future biodegradable implant development.

Atomic structure evolution related to the Invar effect in Fe-based bulk metallic glasses.

The Invar effect is universally observed in Fe-based bulk metallic glasses. However, there is limited understanding on how this effect manifests at the atomic scale. Here, we use in-situ synchrotron-based high-energy X-ray diffraction to study the structural transformations of (Fe71.2B24Y4.8)96Nb4 and (Fe73.2B22Y4.8)95Mo5 bulk metallic glasses around the Curie temperature to understand the Invar effect they exhibit. The first two diffraction peaks shift in accordance with the macroscopically measured thermal expansion, which reveals the Invar effect. Additionally, the nearest-neighbor Fe-Fe pair distance correlates well with the macroscopic thermal expansion. In-situ X-ray diffraction is thus able to elucidate the Invar effect in Fe-based metallic glasses at the atomic scale. Here, we find that the Invar effect is not just a macroscopic effect but has a clear atomistic equivalent in the average Fe-Fe pair distance and also shows itself in higher-order atomic shells composed of multiple atom species.

3D nanoscale analysis of bone healing around degrading Mg implants evaluated by X-ray scattering tensor tomography.

The nanostructural adaptation of bone is crucial for its biocompatibility with orthopedic implants. The bone nanostructure also determines its mechanical properties and performance. However, the bone's temporal and spatial nanoadaptation around degrading implants remains largely unknown. Here, we present insights into this important bone adaptation by applying scanning electron microscopy, elemental analysis, and small-angle X-ray scattering tensor tomography (SASTT). We extend the novel SASTT reconstruction method and provide a 3D scattering reciprocal space map per voxel of the sample's volume. From this reconstruction, parameters such as the thickness of the bone mineral particles are quantified, which provide additional information on nanostructural adaptation of bone during healing. We selected a rat femoral bone and a degrading ZX10 magnesium implant as model system, and investigated it over the course of 18 months, using a sham as control. We observe that the bone's nanostructural adaptation starts with an initially fast interfacial bone growth close to the implant, which spreads by a re-orientation of the nanostructure in the bone volume around the implant, and is consolidated in the later degradation stages. These observations reveal the complex bulk bone-implant interactions and enable future research on the related biomechanical bone responses. STATEMENT OF SIGNIFICANCE: Traumatic bone injuries are among the most frequent causes of surgical treatment, and often require the placement of an implant. The ideal implant supports and induces bone formation, while being mechanically and chemically adapted to the bone structure, ensuring a gradual load transfer. While magnesium implants fulfill these requirements, the nanostructural changes during bone healing and implant degradation remain not completely elucidated. Here, we unveil these processes in rat femoral bones with ZX10 magnesium implants and show different stages of bone healing in such a model system.

X-ray Diffraction Computed Nanotomography Applied to Solve the Structure of Hierarchically Phase-Separated Metallic Glass.

The structure of matter at the nanoscale, in particular that of amorphous metallic alloys, is of vital importance for functionalization. With the availability of synchrotron radiation, it is now possible to visualize the internal features of metallic samples without physically destroying them. Methods based on computed tomography have recently been employed to explore the local features. Tomographic reconstruction, while it is relatively uncomplicated for crystalline materials, may generate undesired artifacts when applied to featureless amorphous or nanostructured metallic alloys. In this study we show that X-ray diffraction computed nanotomography can provide accurate details of the internal structure of a metallic glass. We demonstrate the power of the method by applying it to a hierarchically phase-separated amorphous sample with a small volume fraction of crystalline inclusions, focusing the X-ray beam to 500 nm and ensuring a sub-micrometer 2D resolution via the number of scans.

Structural relaxation in layered, non-stoichiometric Fe7S8.

In this study, we investigate the kinetics of the enantiotropic solid-solid ß-transition in Fe7S8 pyrrhotite, which presents a prominent example of a metal-nonmetal compound with layered crystal structure. The low-temperature (4C) and high-temperature (1C) modifications differ in their crystallographic unit-cell dimension, vacancy distribution, and magnetic ordering in the crystal lattice. Fast differential scanning calorimetry (FDSC) reveals that cooling of the paramagnetic 1C phase below the transformation temperature Tß = 597 K, which is also the Curie temperature, generates a metastable phase that transforms into the ferrimagnetic 4C phase with high vacancy order upon further annealing below Tß. Upon fast cooling, the low-temperature modification shows an energetically excited phase with higher entropy that relaxes towards the equilibrated pyrrhotite polymorph. The kinetics of the superheating and the structural relaxation as obtained from FDSC experiments provide deeper insight into the stability of Fe7S8 polymorphs. This may pave a new path to decipher in detail the kinetics of solid-solid phase transformations and the long-term lifespan of defects in Earth and synthetic materials.

Unconventional magnetization textures and domain-wall pinning in Sm-Co magnets.

Some of the best-performing high-temperature magnets are Sm-Co-based alloys with a microstructure that comprises an [Formula: see text] matrix and magnetically hard [Formula: see text] cell walls. This generates a dense domain-wall-pinning network that endows the material with remarkable magnetic hardness. A precise understanding of the coupling between magnetism and microstructure is essential for enhancing the performance of Sm-Co magnets, but experiments and theory have not yet converged to a unified model. Here, transmission electron microscopy, atom probe tomography, and nanometer-resolution off-axis electron holography have been combined with micromagnetic simulations to reveal that the magnetization state in Sm-Co magnets results from curling instabilities and domain-wall pinning effects at the intersections of phases with different magnetic hardness. Additionally, this study has found that topologically non-trivial magnetic domains separated by a complex network of domain walls play a key role in the magnetic state by acting as nucleation sites for magnetization reversal. These findings reveal previously hidden aspects of magnetism in Sm-Co magnets and, by identifying weak points in the microstructure, provide guidelines for improving these high-performance magnetic materials.

Structured nanoscale metallic glass fibres with extreme aspect ratios.

Micro- and nanoscale metallic glasses offer exciting opportunities for both fundamental research and applications in healthcare, micro-engineering, optics and electronics. The scientific and technological challenges associated with the fabrication and utilization of nanoscale metallic glasses, however, remain unresolved. Here, we present a simple and scalable approach for the fabrication of metallic glass fibres with nanoscale architectures based on their thermal co-drawing within a polymer matrix with matched rheological properties. Our method yields well-ordered and uniform metallic glasses with controllable feature sizes down to a few tens of nanometres, and aspect ratios greater than 1010. We combine fluid dynamics and advanced in situ transmission electron microscopy analysis to elucidate the interplay between fluid instability and crystallization kinetics that determines the achievable feature sizes. Our approach yields complex fibre architectures that, combined with other functional materials, enable new advanced all-in-fibre devices. We demonstrate in particular an implantable metallic glass-based fibre probe tested in vivo for a stable brain-machine interface that paves the way towards innovative high-performance and multifunctional neuro-probes.

A lean magnesium-zinc-calcium alloy ZX00 used for bone fracture stabilization in a large growing-animal model.

Over the last decade, demand has increased for developing new, alternative materials in pediatric trauma care to overcome the disadvantages associated with conventional implant materials. Magnesium (Mg)-based alloys seem to adequately fulfill the vision of a homogeneously resorbable, biocompatible, load-bearing and functionally supportive implant. The aim of the present study is to introduce the high-strength, lean alloy Mg‒0.45Zn‒0.45Ca, in wt% (ZX00), and for the first time investigate the clinical applicability of screw osteosynthesis using this alloy that contains no rare-earth elements. The alloy was applied in a growing sheep model with osteotomized bone (simulating a fracture) and compared to a non-osteotomy control group regarding degradation behavior and fracture healing. The alloy exhibits an ultimate tensile strength of 285.7 ± 3.1 MPa, an elongation at fracture of 18.2 ± 2.1%, and a reduced in vitro degradation rate compared to alloys containing higher amounts of Zn. In vivo, no significant difference between the osteotomized bone and the control group was found regarding the change in screw volume over implantation time. Therefore, it can be concluded that the fracture healing process, including its effects on the surrounding area, has no significant influence on degradation behavior. There was also no negative influence from hydrogen-gas formation on fracture healing. Despite the proximal and distal screws showing chronologically different gas release, the osteotomy showed complete consolidation. STATEMENT OF SIGNIFICANCE: Conventional implants involve several disadvantages in pediatric trauma care. Magnesium-based alloys seem to overcome these issues as discussed in the recent literature. This study evaluates the clinical applicability of high-strength lean Mg‒0.45Zn‒0.45Ca (ZX00) screws in a growing-sheep model. Two groups, one including a simulated fracture and one group without fracture, underwent implantation of the alloy and were compared to each other. No significant difference regarding screw volume was observed between the groups. There was no negative influence of hydrogen-gas formation on fracture healing and a complete fracture consolidation was found after 12 weeks for all animals investigated.

Multistep Crystallization and Melting Pathways in the Free-Energy Landscape of a Au-Si Eutectic Alloy.

Crystals do eventually melt if they are heated to their characteristic melting point. However, this is practically only the case for high-temperature stable crystals, whereas low-temperature metastable crystals generally transform, before melting, into a more stable solid during heating. Here, it is illustrated that low-temperature crystals can, however, be melted via fast differential scanning calorimetry (FDSC), even in metallic systems where nucleation and growth kinetics are rapid. For a Au-Si eutectic alloy, various metastable and stable solid states, i.e., (Au-α), (Au-ß), γ, and (Au-Si), which form under well-controlled conditions and melt at high heating rates by preventing the metastable-to-stable solid phase transition, are isolated. It is demonstrated that Au81.4Si18.6 can fully melt at various temperatures, i.e., 294 °C, 312 °C, 352 °C, and 363 °C, with differing melting enthalpies ranging from 6.52 to 9.83 kJ mol-1. The melting and crystallization paths of the metastable solids are determined by constructing an energy-temperature diagram. This approach advances the general understanding of nucleation in metallic and other systems, and is expected to contribute to the detailed understanding of thermophysical phenomena that occur at spatially reduced dimensions and/or short time scales, for example in thin-film deposition, nanomaterials production, or additive manufacturing.

Differences in Mobility and Dispersal Capacity Determine Body Size Clines in Two Common Alpine-Tundra Arthropods.

The Arctic is projected to be severely impacted by changes in temperature and precipitation. Species react to these changes by shifts in ranges, phenology, and body size. In ectotherms, the patterns of body size clines and their underlying mechanisms are often hard to untangle. Mountains provide a space-for-time substitute to study these shifts along multiple spatial gradients. As such, mobility and dispersal capacity might conceal reactions with elevation. We test this influence on body size clines by comparing two common arthropods of the alpine tundra. We find that high mobility in the lycosid spider Pardosa palustris blurs elevational effects. Partially low mobility at least during development makes the carabid beetle Amara alpina more susceptible to elevational effects. Specific life-history mechanisms, such as brood care in lycosid spiders and holometabolic development in carabid beetles, are the possible cause.

Thermal niche predictors of alpine plant species.

Within the context of species distribution models, scrutiny arises from the choice of meaningful environmental predictors. Thermal conditions are not the sole driver, but are the most widely acknowledged abiotic driver of plant life within alpine ecosystems. We linked long-term measurements of direct, plant-relevant, near-surface temperatures to plant species frequency. Across 47 sites located along environmental gradients within the Scandinavian mountain chain, the thermal preferences of 26 focal species of vascular plants, lichens, and bryophytes were explored. Based on partial least-squares regression, we applied a relative importance analysis to derive inductively the thermal variables that were best related to a species' frequency. To discover potential seasonal variability of thermal controls, analyses were both differentiated according to meteorological season and integrated across the entire year. The pronounced interspecies and temporal variability of thermal constraints revealed the thermal niches were much more nuanced and variable than they have commonly been represented. This finding challenges us to present, interrogate, and interpret data representing these thermal niches, which seems to be required in order to move beyond purely probabilistic and correlative descriptions of species' range limits. Thus, this information will help improve predictions of species distributions in complex arctic-alpine landscapes.

Size-dependent diffusion controls natural aging in aluminium alloys.

A key question in materials science is how fast properties evolve, which relates to the kinetics of phase transformations. In metals, kinetics is primarily connected to diffusion, which for substitutional elements is enabled via mobile atomic-lattice vacancies. In fact, non-equilibrium vacancies are often required for structural changes. Rapid quenching of various important alloys, such as Al- or Mg-alloys, results for example in natural aging, i.e. slight movements of solute atoms in the material, which significantly alter the material properties. In this study we demonstrate a size effect of natural aging in an AlMgSi alloy via atom probe tomography with near-atomic image resolution. We show that non-equilibrium vacancy diffusional processes are generally stopped when the sample size reaches the nanometer scale. This precludes clustering and natural aging in samples below a certain size and has implications towards the study of non-equilibrium diffusion and microstructural changes via microscopy techniques.

Biocorrosion Zoomed In: Evidence for Dealloying of Nanometric Intermetallic Particles in Magnesium Alloys.

Biodegradable magnesium alloys generally contain intermetallic phases on the micro- or nanoscale, which can initiate and control local corrosion processes via microgalvanic coupling. However, the experimental difficulties in characterizing active degradation on the nanoscale have so far limited the understanding of how these materials degrade in complex physiological environments. Here a quasi-in situ experiment based on transmission electron microscopy (TEM) is designed, which enables the initial corrosion attack at nanometric particles to be accessed within the first seconds of immersion. Combined with high-resolution ex situ cross-sectional TEM analysis of a well-developed corrosion-product layer, mechanistic insights into Mg-alloys' degradation on the nanoscale are provided over a large range of immersion times. Applying this methodology to lean Mg-Zn-Ca alloys and following in detail the dissolution of their nanometric Zn- and Ca-rich particles the in statu nascendi observation of intermetallic-particle dealloying is documented for magnesium alloys, where electrochemically active Ca and Mg preferentially dissolve and electropositive Zn enriches, inducing the particles' gradual ennoblement. Based on electrochemical theory, here, the concept of cathodic-polarization-induced dealloying, which controls the dynamic microstructural changes, is presented. The general prerequisites for this new dealloying mechanism to occur in multicomponent alloys and its distinction to other dealloying modes are also discussed.

Exceptional Strengthening of Biodegradable Mg-Zn-Ca Alloys through High Pressure Torsion and Subsequent Heat Treatment.

In this study, two biodegradable Mg-Zn-Ca alloys with alloy content of less than 1 wt % were strengthened via high pressure torsion (HPT). A subsequent heat treatment at temperatures of around 0.45 Tm led to an additional, sometimes even larger increase in both hardness and tensile strength. A hardness of more than 110 HV and tensile strength of more than 300 MPa were achieved in Mg-0.2Zn-0.5Ca by this procedure. Microstructural analyses were conducted by scanning and transmission electron microscopy (SEM and TEM, respectively) and atom probe tomography (APT) to reveal the origin of this strength increase. They indicated a grain size in the sub-micron range, Ca-rich precipitates, and segregation of the alloying elements at the grain boundaries after HPT-processing. While the grain size and segregation remained mostly unchanged during the heat treatment, the size and density of the precipitates increased slightly. However, estimates with an Orowan-type equation showed that precipitation hardening cannot account for the strength increase observed. Instead, the high concentration of vacancies after HPT-processing is thought to lead to the formation of vacancy agglomerates and dislocation loops in the basal plane, where they represent particularly strong obstacles to dislocation movement, thus, accounting for the considerable strength increase observed. This idea is substantiated by theoretical considerations and quenching experiments, which also show an increase in hardness when the same heat treatment is applied.